To see product details, add this item to your cart. You can always remove it later.
FREE Returns
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC

4.5 4.5 out of 5 stars 3,069 ratings

To see product details, add this item to your cart. You can always remove it later.
FREE Returns

Purchase options and add-ons

Material Brass
Brand Aootech
Item Dimensions LxWxH 3 x 2.5 x 0.39 inches
Exterior Finish Brass
Inlet Connection Size 0.01 Inches
Inlet Connection Type threaded

About this item

  • High Cost Performance:20pcs+2pcs(Extra Bonus)=22pcs.
  • High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
  • Screw Into Any 10/24-Threaded Mist Nozzle Opening.
  • Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min.
  • Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.

Customer ratings by feature

Easy to install
4.6 4.6
Easy to use
4.4 4.4
Value for money
4.2 4.2

Frequently bought together

$7.99 ($0.36/Count)
Get it as soon as Sunday, Mar 24
In Stock
Sold by Aoputy Ltd and ships from Amazon Fulfillment.
+
$15.27
Get it as soon as Sunday, Mar 24
In Stock
Ships from and sold by Amazon.com.
+
$8.59
Get it as soon as Sunday, Mar 24
In Stock
Ships from and sold by Amazon.com.
Total price:
To see our price, add these items to your cart.
Details
Added to Cart
These items are shipped from and sold by different sellers.
Choose items to buy together.

Compare with similar items

This Item
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
Recommendations
RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.016" (0.4 mm) 10-24 UNC
dummy
RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.028" (0.7 mm) 10-24 UNC
dummy
Orbit Arizona Outdoor Misting System 4-Inch Nozzle Extension 5-Pack 10056H
dummy
Brass Misting Nozzles for Garden Cooling System 0.012" (0.3 mm) 10/24 UNC (20 PCS)
dummy
LOOYUAN Brass Misting Nozzles 0.016" Orifice (0.4mm) 10/24 UNC, Water Mister Parts Fog Nozzles for Patio Misting System Outdoor Cooling System (30)
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Price-20% $7.99
Typical:$9.99
$11.89$11.89$13.68$8.99$11.99
Delivery
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Sunday, Mar 24
Get it as soon as Monday, Mar 25
Get it as soon as Sunday, Mar 24
Customer Ratings
Easy to install
4.6
4.8
4.8
4.6
4.5
4.4
Easy to use
4.4
4.6
4.6
5.0
4.3
4.0
Value for money
4.2
4.4
4.4
3.1
4.0
4.1
Sold By
Aoputy Ltd
RuoFeng
RuoFeng
Amazon.com
COOPLAY
Kinglooyuan
material
Brass
Brass
Brass
Stainless Steel
Brass
Brass
inlet size
0.01
4
0.01
inlet type
threaded
threaded
threaded
exterior finish
Brass
Stainless Steel, Brass
Stainless Steel, Brass
Stainless Steel, Brass
Stainless Steel, Brass
Stainless Steel, Brass

Product Description

From The Manufacturer

This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage. It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog and other humidification place. Use of precision nozzle keypunch, sophisticated production, saving more than 10 times cost compared with the humidifier. The built-in stainless steel wafer through advanced forging process, strong durability, is 2.5 times the life of similar nozzle. Nozzle can fully spray use the pressure of tap water.

The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.

Leak-proof, self-sealing o-ring included with each nozzle; no tape or sealant is required.

A Filter on your mist system is highly recommended.

WARNING

This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.

Included In The Package:

22 x Brass Misting Nozzles

Looking for specific info?

Product information

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

URL:
Price: ($)
Shipping cost: ($)
Date of the price:
/
/

Store name:
City:
State:
Price: ($)
Date of the price:
/
/


Please sign in to provide feedback.

WARNING:

CHOKING HAZARD -- Small parts. Not for children under 3 yrs.

Customer reviews

4.5 out of 5 stars
4.5 out of 5
3,069 global ratings

Customers say

Customers like the value, ease of installation, and performance of the valve. They mention that it is a great value, easy to install, and works great. Customers also like the quality, and fit. However, some customers have mixed opinions on mist, and leakage.

AI-generated from the text of customer reviews

358 customers mention301 positive57 negative

Customers like the performance of the valve. They say the nozzles work great, putting out a nice even mist with no dripping. They also mention that the machine is running great, and has no problems. They further say that white vinegar overnight works pretty well in clearing obstructions.

"...It works great. Nothing gets watered too much, and nothing dries out dangerously.How "thirsty" are these nozzles?..." Read more

"These are brass and work great. I have had others that were plastic and they did not have a consistant spray pattern...." Read more

"It worked well and I will be misting fan, but it doesn’t help with the same as the original did...." Read more

"...All of them are working perfect putting out a nice mist. I am going to buy another set just to have on hand because I like these so well...." Read more

210 customers mention183 positive27 negative

Customers like the value of the valve. They say that it is a great value, economical to replace clogged heads, and makes their air conditioner more efficient.

"...The low price on these makes it economical to replace clogged heads as needed...." Read more

"Cheap and easy replacements for my cheap stand mister I bought from Home Depot. We have hard water so the nozzles get clogged easily...." Read more

"Great price for these mister nozzles. Makes it affordable to replace them each year." Read more

"Good price" Read more

187 customers mention175 positive12 negative

Customers are satisfied with the quality of the valve. They mention that it's well-made, sturdy, and works well as a replacement nozzle. Some customers also say that the nozzles are perfect to replace old, stopped up misters.

"...It’s easy to install and seem pretty sturdy...." Read more

"...The knurled finish is easy to grip, and the threads are machined to correct tolerances to fit the output fitting...." Read more

"Great quality, easy to install. Revitalized the mister for my chickens for at least another year!" Read more

"As others have said - the threading seems standard across these units. These have a rather short base - so they screwed in plush versus my original...." Read more

90 customers mention84 positive6 negative

Customers find the installation process of the valve to be easy. They mention that it is easy to install, that it fits perfectly, and that it makes it easy to change out clogged heads.

"...No tools needed for installing the nozzles. Gently screw them finger-tight. Easy.My plants are hydrated. I'm happy...." Read more

"...It’s easy to install and seem pretty sturdy...." Read more

"...This makes it easier to change out clogged heads...." Read more

"They really work and work good, no problem at all to install them and that’s it" Read more

71 customers mention61 positive10 negative

Customers like the fit of the valve. They say that the nozzles fit perfectly and perform excellently. The brass nozzle is designed to fit a standard garden hose and the mister fittings, so no adapter is needed.

"Came the next day. Seem to fit and work well, one missing the orifice. The ones that work seem to be same as the original system's quality...." Read more

"...Generally they were pretty uniform in size, but a few seemed to be smaller than others...." Read more

"...It also works great for my patio mister. Great fit and spray pattern." Read more

"...Nothing to it - easy to drill, easy to tap, and the nozzles fit perfectly and hold in well. No drips or leaks that I can notice...." Read more

26 customers mention26 positive0 negative

Customers like the temperature of the valve. They say it really cools down an area, works well for the heat, and is perfect for hot humid conditions.

"...Love this concept! These really cool down an area!!..." Read more

"...These misters will cool your yard, water the grass or garden using the least amount of water...." Read more

"...The system worked well at producing a cool airflow but ,,,, I think I should use only two nozzles instead of four,,,,,, within 10 minutes I had..." Read more

"...The entire system works well, delivering a nice cooling mist with just a little bit of pressure from the hose...." Read more

130 customers mention61 positive69 negative

Customers have mixed opinions about the mist produced by the valve. Some mention that the tips produced a fine mist, while others say that the nozzles do clog frequently from calcium in the water. Some customers also say that over time the hoses have clogged and deteriorated. Overall, the opinions are mixed, and it's recommended to read the reviews carefully before making a purchase.

"...I have had others that were plastic and they did not have a consistant spray pattern...." Read more

"...In fact, the mist output is much better." Read more

"...One nozzle did not mist - it shot a fine stream of water. I just swapped it with another nozzle and all was well...." Read more

"...Nozzles were screwed in tees designed to accept them. They give a very fine mist...." Read more

48 customers mention24 positive24 negative

Customers are mixed about the leakage of the valve. Some mention that there are no drips or leaks that they can notice, and nothing dries out dangerously. However, others say that there is too much water coming out of the nozzles and it floods the patio. They find it very easy to just soak them in a cup of vinegar to remove them.

"...It works great. Nothing gets watered too much, and nothing dries out dangerously.How "thirsty" are these nozzles?..." Read more

"...They give a very fine mist. Over time they get a build up of water deposits (calcium,..) and will start to drip and even block off completely...." Read more

"...No drips or leaks that I can notice...." Read more

"...Did it cool ? Yes ! Just too much moisture in the shop ...." Read more

Misting wand for plants
5 Stars
Misting wand for plants
Have used 5 of the 22 nozzles in this package. Two started slowly but opened right up with a quick rap from a fingernail. After many hours all 5 still work fine.I have some flowers that love sunlight but their location can be too sunny on a clear day. Photos show a 5-foot misting wand that can be placed by the plants. It works great. Nothing gets watered too much, and nothing dries out dangerously.How "thirsty" are these nozzles? I put the misting wand inside a larger pipe with the end set to drain in a bucket. Thirty minutes later the bucket held 3.5 quarts. That would be 7 quarts (1.75 gallons) per hour. Water pressure here is set to 50 psi. On average, each nozzle sprayed 0.35 gallons per hour. That's certainly frugal watering. It's reasonably close to the vendor's advertised 0.5 gallons per hour.For this project I used a 5-foot piece of CPVC pipe, brand name PEX. It's available in white, red, or the blue I used. The Shark Bite fittings on the ends cost more than some other fittings but with Shark Bite you don't need to buy any special tools. Just push the pipe into the fitting. Then there's an adapter to connect the pipe thread end to a hose thread end, and then a quick-connect fitting to the shutoff valve and hose. Some Teflon tape keeps the threaded fittings watertight. Of course the fitting on the opposite end seals the pipe closed so water only comes out the misting nozzles. If you're familiar with fittings do it any way you want. If all this is a mystery to you then do what I did at my orange big box store: ask an expert. Once you have the right pieces this could be the easiest puzzle ever assembled.Apache 99000322 1/2" x 260' Spool of Teflon Thread Seal TapeMy nozzles are evenly spaced about a foot apart. All point in the same direction. Design yours any way you like. My wand simply sits in notches on a couple pieces of scrap wood.I used the Greenlee DTAP10-24 Combination Drill and Tap Bit, 10-24NC to make the threaded holes for the little nozzles. This is not like drilling a hole. You need to make little holes in the pipe, then gently, gently tap some threads in those little holes. This bit makes the little hole and then cuts screw threads in the side of each hole. If you use a power drill, use the lowest, slowest setting. Be gentle. I put a bit of masking tape on the bit so I would know when to stop.No tools needed for installing the nozzles. Gently screw them finger-tight. Easy.My plants are hydrated. I'm happy. And I hope you found this helpful.
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Reviewed in the United States on September 23, 2016
Customer image
5.0 out of 5 stars Misting wand for plants
Reviewed in the United States on September 23, 2016
Have used 5 of the 22 nozzles in this package. Two started slowly but opened right up with a quick rap from a fingernail. After many hours all 5 still work fine.

I have some flowers that love sunlight but their location can be too sunny on a clear day. Photos show a 5-foot misting wand that can be placed by the plants. It works great. Nothing gets watered too much, and nothing dries out dangerously.

How "thirsty" are these nozzles? I put the misting wand inside a larger pipe with the end set to drain in a bucket. Thirty minutes later the bucket held 3.5 quarts. That would be 7 quarts (1.75 gallons) per hour. Water pressure here is set to 50 psi. On average, each nozzle sprayed 0.35 gallons per hour. That's certainly frugal watering. It's reasonably close to the vendor's advertised 0.5 gallons per hour.

For this project I used a 5-foot piece of CPVC pipe, brand name PEX. It's available in white, red, or the blue I used. The Shark Bite fittings on the ends cost more than some other fittings but with Shark Bite you don't need to buy any special tools. Just push the pipe into the fitting. Then there's an adapter to connect the pipe thread end to a hose thread end, and then a quick-connect fitting to the shutoff valve and hose. Some Teflon tape keeps the threaded fittings watertight. Of course the fitting on the opposite end seals the pipe closed so water only comes out the misting nozzles. If you're familiar with fittings do it any way you want. If all this is a mystery to you then do what I did at my orange big box store: ask an expert. Once you have the right pieces this could be the easiest puzzle ever assembled.
[[ASIN:B00IYFC2VI Apache 99000322 1/2" x 260' Spool of Teflon Thread Seal Tape]]

My nozzles are evenly spaced about a foot apart. All point in the same direction. Design yours any way you like. My wand simply sits in notches on a couple pieces of scrap wood.

I used the [[ASIN:B000FCGRWI Greenlee DTAP10-24 Combination Drill and Tap Bit, 10-24NC]] to make the threaded holes for the little nozzles. This is not like drilling a hole. You need to make little holes in the pipe, then gently, gently tap some threads in those little holes. This bit makes the little hole and then cuts screw threads in the side of each hole. If you use a power drill, use the lowest, slowest setting. Be gentle. I put a bit of masking tape on the bit so I would know when to stop.

No tools needed for installing the nozzles. Gently screw them finger-tight. Easy.

My plants are hydrated. I'm happy. And I hope you found this helpful.
Images in this review
Customer image Customer image Customer image Customer image Customer image Customer image Customer image
Customer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer image
100 people found this helpful
Report
Reviewed in the United States on August 4, 2023
Reviewed in the United States on April 27, 2023
Reviewed in the United States on August 10, 2023
Reviewed in the United States on June 5, 2023
2 people found this helpful
Report
Reviewed in the United States on April 12, 2023
One person found this helpful
Report
Reviewed in the United States on July 26, 2023
Reviewed in the United States on December 17, 2023