Currently unavailable.
We don't know when or if this item will be back in stock.
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

BV BV-RH-01 Range Hood, Stainless Steel

4.1 4.1 out of 5 stars 439 ratings

To see product details, add this item to your cart. You can always remove it later.
Brand BV
Product Dimensions 22"D x 29.75"W x 8"H
Color Stainless Steel
Special Feature Led Lights,Lighting,Stainless Steel
Finish Type Stainless Steel

About this item

  • Powerful Airflow 750CFM Greatly Reduces Cooking Smoke and Grease - Dual motors with high airflow up to 860 CFM can take away most cooking smoke and grease. Leave your kitchen clean with fresh air.
  • Provide Extra Lighting Aids in Prep Safety – With bright 2 watts Energy-Saver LED Lights, they will not only provide extra lighting to the space you cook in, but also aids in prep safety.
  • Easy-to-Clean and Dishwasher Safe Baffle Filters - Featured 430 stainless steel baffle filters. They are easy to remove and dishwasher safe!
  • Contemporary Design – Full body with 18 Gauge Stainless Steel Design provides a much modern look for your kitchen.Minimum Height Above Cook Top: 24 inches;Maximum Height Above Cook Top: 32 inches;Recommended Height About Cook Top: 27 inches to 30 inches.
  • Worry-free Guarantee ETL Rated. 2-year Product Warranty Protected - Backed by BV 30 days Money Back Guarantee with 2 years warranty.One-year limited product warranty with technical support service included.
See more product details

Additional Details

Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.

Small Business
This product is from a small business brand. Support small. Learn more

Product information

Technical Details

Additional Information

Warranty & Support

Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions here.

Feedback

BV

BV BV-RH-01 Range Hood, Stainless Steel


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

/
/
/
/
Please sign in to provide feedback.

Product guides and documents

What's in the box

  • Stainless Steel Baffle Filters
  • Product Description

    Easy to Disassemble for Cleaning This BV range hood is a high airflow ducted unit with lights and stainless steel baffle filters. The entire range hood is designed with easy removal and cleaning of parts, without specialized tools required. Patented “SLANTED ” Design Slanted housing provides effective, quiet airflow and provides full coverage of the entire cooking surface the fan sits over. 750CFM High Power and 7.5 Sones Low Noise The range hood provides up to 750 CFM while only outputting 7.5 sones at max fan speed. Specifications : Exact Dimensions (L-W-H): 29-3/4" x 22-1/20" x 7-1/4" to 8-1/20" Materials: Brushed Stainless Steel / Sheet Metal Power Rating: 120V/60Hz (ETL Certified) Total Input Power: 174W Motor Input Power: 170W L Levels of Speed Control: 3-speed electronic button control Number of Motors: 2 Fan Type: Aluminum Motor Fan Filtration Type: Stainless steel baffle filters Illumination: 2x 2W LED lights Vent Shutter Opening Size: 6-1/4 ” Shop with confidence BV is continuously improving and evolving for our customer needs. Our goal is your 100% satisfaction.We offer every customer a limited 2-year product warranty on every item purchased


    From the manufacturer

    KITCHEN

    BV Kitchen Range Hood

    Keep indoor Air Clean and Fresh

    COOK

    logo
    About BV Home

    BV offers a variety line of home improvement products and appliances in North America. BV is continuously improving and evolving for our customer needs.

    BV Stainless Steel Range Hood for 30" & 36" Under Cabinet

    High Power and Low Noise

    The purpose of a range hood is to keep indoor air clean and fresh. The fan draws grease, smoke, smells, and steam up and out of your home reducing stains on paint and tiles, and improving the air you breathe.

    BV range hood is a high airflow ducted unit with lights and stainless steel baffle filters. The entire range hood is designed with easy removal and cleaning of parts, without specialized tools required.

    • Materials: Brushed Stainless Steel / Sheet Metal
    • Power Rating: 120V/60Hz
    • Number of Motors: 2
    • Filtration Type: Stainless steel baffle filters
    • 2 Sizes Available: 30 Inches, 36 Inches
    safe

    Stainless Steel Baffle Filters - Dishwasher Safe

    Forcing grease-saturated air to quickly and repeatedly change direction as it rises through the filter. The grease droplets end up condensing to the metal blades and then subsequently draining into the filter tray.

    Dishwasher Safe. Easy to clean.

    top

    cook

    Minimum Height Above Cook Top: 24 inches;

    Maximum Height Above Cook Top: 32 inches;

    Recommended Height About Cook Top: 27 inches to 30 inches.

    801 01 01-36
    30-inch Under-Cabinet Range Hood -750 CFM 30-inch Under-Cabinet Range Hood -750 CFM 36-inch Under-Cabinet Range Hood -750 CFM
    Customer Reviews
    4.3 out of 5 stars
    363
    4.1 out of 5 stars
    439
    4.0 out of 5 stars
    38
    Overall Size (LxWxH) 29.5" x 20" x 6" 29.5" x 22.1" x 7.5" 35.25" x 21.38" x 8"
    Control Type 6 Push Buttons 5 Push Buttons 5 Push Buttons
    Mounting Type Under Cabinet Under Cabinet Under Cabinet
    Airflow ( Cubic Feet per Minute) 750 CFM 750 CFM 750 CFM
    Airflow ( Cubic Feet per Minute) Dual Motors, 4 Fan Speed / 7.5 Sones Dual Motors, 3 Fan Speed / 7.5 Sones Dual Motors, 3 Fan Speed / 7.5 Sones
    Installation Top Vent, 6" Duct Size / 3-prong plug Top Vent, 6" Duct Size / 3-prong plug Top Vent, 6" Duct Size / 3-prong plug
    Power Rating 120V/60Hz 120V/60Hz 120V/60Hz
    LED Lighting 2 Front, 3 watts 2 Front, 2 watts 2 Front, 2 watts
    Fan Type Aluminum Motor Fan Steel Motor Fan Steel Motor Fan
    Filter Type Stainless steel baffle filters(Dishwasher Safe) Stainless steel baffle filters (Dishwasher Safe) Stainless steel baffle filters (Dishwasher Safe)

    Compare with similar items

    This Item
    BV BV-RH-01 Range Hood, Stainless Steel
    BV BV-RH-01 Range Hood, Stainless Steel
    Recommendations
    ZLINE 30" Convertible Vent Under Cabinet Range Hood in Stainless Steel (520-30)
    dummy
    30 Inch Under Cabinet Range Hood with 900-CFM, 4 Speed Gesture Sensing&Touch Control Panel, Stainless Steel Kitchen Vent
    dummy
    IKTCH Upgrated 30"Under Cabinet Range Hood, 900 CFM Ducted Range Hood with 4 Speed Fan, Black Stainless Steel & Tempered Glass Range Hood 30 inch with Gesture Sensing&Touch Control Making life Smarter
    dummy
    42" 2000 CFM Under Cabinet Range Hood in Stainless Steel
    dummy
    IKTCH 30 Inch Under Cabinet Range Hood with 900-CFM, 4 Speed Gesture Sensing&Touch Control Panel, Stainless Steel Kitchen Vent with 2 Pcs Baffle Filters(IKC01-30)
    Details
    Added to Cart
    Details
    Added to Cart
    Details
    Added to Cart
    Details
    Added to Cart
    Details
    Added to Cart
    PriceCurrently unavailable.-15% $892.46
    List:$1,049.95
    $281.99$339.99$2,299.99$309.00
    Delivery
    Get it Apr 8 - 11
    Get it as soon as Wednesday, Apr 3
    Get it as soon as Wednesday, Apr 3
    Get it Apr 3 - 8
    Get it as soon as Wednesday, Apr 3
    Customer Ratings
    Suction power
    3.9
    4.3
    4.4
    4.1
    Easy to install
    3.6
    4.2
    4.2
    4.1
    Noise level
    3.4
    3.3
    3.5
    3.8
    Value for money
    4.2
    4.2
    4.2
    Sold By
    Z Line Kitchen
    HisoHu
    N1 DFL
    247Grills
    iKTCH
    material
    Stainless Steel
    Stainless Steel
    Stainless Steel
    Stainless Steel
    Stainless Steel
    Stainless Steel
    mounting type
    Under Cabinet Mount
    Wall Mount
    Under Cabinet Mount
    Under Cabinet Mount
    Under Cabinet Mount
    Under Cabinet Mount
    air flow capacity
    750 cubic feet per minute
    700 cubic feet per minute
    900 cubic feet per minute
    900 cubic feet per minute
    1000 cubic feet per minute
    900 cubic feet per minute
    number of speeds
    4
    4
    4
    4
    4
    filter type
    Baffle
    Baffle
    Baffle
    Baffle
    Mesh
    Baffle
    finish type
    Stainless Steel
    Brushed
    Brushed
    Painted
    Brushed
    Brushed
    light source type
    LED
    LED
    LED
    LED
    Halogen
    LED

    Looking for specific info?

    Customer reviews

    4.1 out of 5 stars
    4.1 out of 5
    439 global ratings

    Customers say

    Customers like the quality, appearance and value of the vent hood. For example, they mention it works great, the design is intelligent and the oil collection pan is sleek. Customers are also happy with value, smell, and ease of cleaning. That said, opinions are mixed on noise, ease of installation, and lighting.

    AI-generated from the text of customer reviews

    159 customers mention153 positive6 negative

    Customers are satisfied with the quality of the vent hood. They mention that it is effective, powerful, and works great. Some appreciate the quiet operation and the fact that it has worked flawlessly.

    "...I'm very pleased with its performance, nice modern unobtrusive appearance, BV's customer service, and I would highly recommend to anyone willing to..." Read more

    "...PROS:It's powerful!The smell of cooking bacon used to linger in our house for 3 to 4 days...." Read more

    "...’s sleek and the metal baffles for grease catching looks good and seems sufficient...." Read more

    "...in the reviews I read: The packaging was top notch, tight and effective, no damage to this unit during shipping...." Read more

    79 customers mention55 positive24 negative

    Customers are mixed about the noise of the vent hood. Some mention that it's quiet for what it is, while others say that it is very noisy and makes a rattling sound after installation.

    "...It's pretty quiet!..." Read more

    "...The double fans are quite quiet, with no vibration. They have a delay shut off switch ability or immediate off. The LEDs have 2 levels...." Read more

    "...It’s somewhat quiet but not as quiet as I thought it would be. I have several issues with it...." Read more

    "...The unit is quiet for what it is and works as it should. The construction is sound and looks fairly easy to clean when needed...." Read more

    69 customers mention60 positive9 negative

    Customers like the appearance of the vent hood. They mention that the design is intelligent, the oil collection pan is sleek, and the module is well thought out for easy cleaning and maintenance. Some say that the pictures make it look nice.

    "...I'm very pleased with its performance, nice modern unobtrusive appearance, BV's customer service, and I would highly recommend to anyone willing to..." Read more

    "...It’s sleek and the metal baffles for grease catching looks good and seems sufficient...." Read more

    "...high power exhaust hood was a very pleasant experience, and it looks really good." Read more

    "...The design is as good as I had hoped. Fan noise (unmounted) is no more than the microwave it is replacing and airflow is impressive on high speed...." Read more

    38 customers mention34 positive4 negative

    Customers like the value of the vent hood. They mention it's easy to install, quiet, and has 3 speeds. Some say the filters don't need to be replaced and that it looks great and works well. Overall, most are satisfied with the value and quality of the product.

    "...So all in all, I think this unit is a GREAT value for the money...." Read more

    "...But, overall, satisfied with my purchase. The price for this hood range is affordable and right for this unit." Read more

    "...This is the best value for the the money and is one of the best purchase decisions we ever made." Read more

    "...] Well built hood easy to install and cheaper then many other hoods" Read more

    37 customers mention34 positive3 negative

    Customers are satisfied with the smell of the vent hood. They mention that it sucks smoke and food odors out, quickly removes the odor and heat from cooking on the stove, and has a 3 speed fan that catches every odor. The power fans allow even and thorough suction of steam and cooking odor from your range or cooking. Some complain about the noise level of the fans.

    "...I didn't do that. Because I there was NO BACON SMELL IN THE ROOM...." Read more

    "...Beautiful, and it works like a champ. 3 speed fan that catches every odor coming from my searing and pan grilling steaks...." Read more

    "...Captures fumes and smoke very well, it actually pulls smoke from 18 to 24 inches in front of the range..." Read more

    "...linearly mounted high power fans allowing even and thorough suction of steam and cooking odors from your range or cooking surface...." Read more

    26 customers mention26 positive0 negative

    Customers find the cleaning process of the vent hood to be easy. They mention that the filters and fan impellers can be easily cleaned. They appreciate the stainless steel baffles, which are easy to wipe down and go into the dishwasher. They also like that the filter can be put in the dishwasher to clean, and that disassembly for cleaning is a joy. Overall, customers are satisfied with the ease of cleaning and recommend the product to others.

    "...not only really makes it look that much more pro but it will be way easier to clean...." Read more

    "...It's a trough, and it's awesome. Easily removable, easily cleaned.CONS:The two built in LED lights are more blue than I prefer...." Read more

    "...The construction is sound and looks fairly easy to clean when needed.Hopefully this thing lasts. I am happy with the purchase." Read more

    "...Controls are simple and work well. Disassembly for cleaning is a joy. Appears to be a quality product in every aspect...." Read more

    71 customers mention47 positive24 negative

    Customers are mixed about the ease of installation. Some mention it's really easy to install, well built, and easy to use. However, others say that installation is a bit tricky, the instructions are confusing, and the item is relatively heavy and should be installed by two persons.

    "...It is pretty easy to get them near perfect and "close enough" works for a quiet fan without vibration...." Read more

    "...It's super easy to use!Five buttons. One button for a light. Three buttons, one for each level of fan speed. And a fifth button to turn it off...." Read more

    "This arrived in perfect condition. The instructions are a little confusing but if you’ve done this before, you know the deal...." Read more

    "...just pop the panels and tray in the dishwasher and removal/reinstallation is quick and painless...." Read more

    65 customers mention26 positive39 negative

    Customers are mixed about the lighting of the vent hood. Some mention that the lights are nice and bright, while others say that they are too bright or dim.

    "...Ask and ye shall receive. The bad news is the replacements are maybe twice as bright, still not very bright, and still something a smidge bluer than..." Read more

    "...I decided the second one sucked plenty of air and the lights were bright enough for me to see what I was cooking just fine...." Read more

    "...CONS:The two built in LED lights are more blue than I prefer. I generally like warmer color hues.And that's it...." Read more

    "...The units lights are harsh as stated by other reviews.The unit is quiet for what it is and works as it should...." Read more

    Awesome product, but read this before you buy.
    5 Stars
    Awesome product, but read this before you buy.
    I had read all of the feedback before buying this. Most of it seemed shipping related or installer related. One needs to set their expectations appropriately when purchasing something like this. It's not a toaster or a countertop microwave where you should just expect to unbox it, not read anything, and go with no hassles. It is more like buying tile or wallpaper. It is a part of a project and requires some knowledge and skills to properly install it and get the best experience. Do not expect you will just be able to slap it in and go.On the note of the bent fans... Mine were VERY slightly bent, or better put, out of true. Sort of like if you hit a rock or curb and it throws your bike wheel off a bit. It is pretty easy to get them near perfect and "close enough" works for a quiet fan without vibration. Some of the vibration is also due to mounting. You should have a nice solid mounting for this and that brings me to that point... The mounting holes are very near the edges of this unit. My cabinets that I mounted them to have particle board bottoms that are MAYBE 1/4 inch thick. There was no way I was going to just screw into that even with smallish washers, no way... Also, the slots / holes in the unit, do not allow for decent sized screws (that said this comes with ZERO mounting hardware so expect a trip to the hardware store). If you wanted to just get hardware and go, you would be putting a good deal of faith in thin sheet metal and particle board. You may have nicer cabinets.. That said... I used a vibrating multi tool to deepen the slots my cabinet floors slid into so I could sneak 1.25" fender washers into, thus allowing the fan to grip the body of the cabinet (1/2 particle board). I used a slightly larger drill bit to make the slots in the hood for the screws a little wider so I didn't have to use very small screws. I also added plastic spacers between the unit and the floor of the cabinet so the bolt tension was not pulling on the sheet metal at all, but instead squeezing it firmly against the spacers and cabinet, forming a very solid connection. This made install a serious PAIN, but it was one I more or less expected. Again, expectations...On the lighting issue, their customer service was AWESOME. I emailed about the lights being very dim, really only good as "night lights" and they mailed me a new set quickly. Ask and ye shall receive. The bad news is the replacements are maybe twice as bright, still not very bright, and still something a smidge bluer than daylight white. Oh well. They help fill out the light blocked by the hood and I'm not going to whine. I would DIY but the circuit that controls them only supports 2w, so this is really the best you can do without really getting in there and doing some modifications.On the fan vibration issue, I found out the fix for that when I answered the follow up email they sent after helping me with the lights. Again, their customer service, for me anyway, was awesome. Thanks guys for that! It only took me about 15 minute to fix it by removing the filters, the oil cup, and the fan shroud come off with three little quick releases you twist 90 degrees then the shrouds pull down, rubber tubes come out of the housing, and they pull out. Hold you finger against the body of the fan blower assemble and fingertip very close to the rim of the fan blade (the smooth part) and turn the blade slowly until it contacts your finger. That is the high spot. Gently push inwards on that part and turn some more.. keep repeating this process until there is no, or nearly no, high spots... Spin it up on low speed and keep your fingers away while you quality check. Thing is, these blade are very thing. If they made them thicker it would mean more rotating mass which means bigger motors or slower fan speed up, and likely more wattage draw. So they can get a little wonky during shipping. I imagine these came from China, likely assembled, so all things considered it arrived in awesome shape... What is 15 minutes of work right? It's a $300 hood that rivals $1500 ones!The next thing, and what I really love, is the power of this unit. Someone commented they are Indian and make stinky food... Love that! I am not Indian but I cook a lot, grill on my cast iron which always set off the smoke alarm (no longer!!!) and do make some aromatic foods. My house no longer smells like bacon all day Sunday (and hey if that's awesome just don't run it right??). While all this fantastic ventilation is happening, you CAN HOLD A CONVERSATION over by it, and I can have it on low sucking up the smells while I go sit down and watch a movie on the other side of my open concept kitchen / living room and it isn't bothersome! To put that in perspective, my crappy GE over the range microwave this replaced, was from 2007 and is that unit that like everyone and their mom and every apartment and hotel room has, only did 200 cfm on low and I think maybe 400 on high (but that is totally bogus!) and you couldn't talk anywhere near it because of how loud it was... I also love the timed shut off feature, just hit the button and walk away and it runs for like a minute or so then shuts itself down.So all in all, I think this unit is a GREAT value for the money. I'm very pleased with its performance, nice modern unobtrusive appearance, BV's customer service, and I would highly recommend to anyone willing to spend a little time doing a good installation. Take some care, pay attention to the details, plan on this taking a few hours to really do right, and have a helper hold it while you get it mounted. Or, you know, buy a 1500 hood and pay someone a few hundred bucks to do it for you.PS: I added some stainless sheet using epoxy to the inside parts of the cabinet prior to mounting and while I put up the backsplash in the picture. This not only really makes it look that much more pro but it will be way easier to clean. Just a project idea for you there... got the piece here on amazon for like $15 a side and only had to trim one inch off either one for a perfect fit.
    Thank you for your feedback
    Sorry, there was an error
    Sorry we couldn't load the review

    Top reviews from the United States

    Reviewed in the United States on July 26, 2018
    Customer image
    rob
    5.0 out of 5 stars Awesome product, but read this before you buy.
    Reviewed in the United States on July 26, 2018
    I had read all of the feedback before buying this. Most of it seemed shipping related or installer related. One needs to set their expectations appropriately when purchasing something like this. It's not a toaster or a countertop microwave where you should just expect to unbox it, not read anything, and go with no hassles. It is more like buying tile or wallpaper. It is a part of a project and requires some knowledge and skills to properly install it and get the best experience. Do not expect you will just be able to slap it in and go.

    On the note of the bent fans... Mine were VERY slightly bent, or better put, out of true. Sort of like if you hit a rock or curb and it throws your bike wheel off a bit. It is pretty easy to get them near perfect and "close enough" works for a quiet fan without vibration. Some of the vibration is also due to mounting. You should have a nice solid mounting for this and that brings me to that point... The mounting holes are very near the edges of this unit. My cabinets that I mounted them to have particle board bottoms that are MAYBE 1/4 inch thick. There was no way I was going to just screw into that even with smallish washers, no way... Also, the slots / holes in the unit, do not allow for decent sized screws (that said this comes with ZERO mounting hardware so expect a trip to the hardware store). If you wanted to just get hardware and go, you would be putting a good deal of faith in thin sheet metal and particle board. You may have nicer cabinets.. That said... I used a vibrating multi tool to deepen the slots my cabinet floors slid into so I could sneak 1.25" fender washers into, thus allowing the fan to grip the body of the cabinet (1/2 particle board). I used a slightly larger drill bit to make the slots in the hood for the screws a little wider so I didn't have to use very small screws. I also added plastic spacers between the unit and the floor of the cabinet so the bolt tension was not pulling on the sheet metal at all, but instead squeezing it firmly against the spacers and cabinet, forming a very solid connection. This made install a serious PAIN, but it was one I more or less expected. Again, expectations...

    On the lighting issue, their customer service was AWESOME. I emailed about the lights being very dim, really only good as "night lights" and they mailed me a new set quickly. Ask and ye shall receive. The bad news is the replacements are maybe twice as bright, still not very bright, and still something a smidge bluer than daylight white. Oh well. They help fill out the light blocked by the hood and I'm not going to whine. I would DIY but the circuit that controls them only supports 2w, so this is really the best you can do without really getting in there and doing some modifications.

    On the fan vibration issue, I found out the fix for that when I answered the follow up email they sent after helping me with the lights. Again, their customer service, for me anyway, was awesome. Thanks guys for that! It only took me about 15 minute to fix it by removing the filters, the oil cup, and the fan shroud come off with three little quick releases you twist 90 degrees then the shrouds pull down, rubber tubes come out of the housing, and they pull out. Hold you finger against the body of the fan blower assemble and fingertip very close to the rim of the fan blade (the smooth part) and turn the blade slowly until it contacts your finger. That is the high spot. Gently push inwards on that part and turn some more.. keep repeating this process until there is no, or nearly no, high spots... Spin it up on low speed and keep your fingers away while you quality check. Thing is, these blade are very thing. If they made them thicker it would mean more rotating mass which means bigger motors or slower fan speed up, and likely more wattage draw. So they can get a little wonky during shipping. I imagine these came from China, likely assembled, so all things considered it arrived in awesome shape... What is 15 minutes of work right? It's a $300 hood that rivals $1500 ones!

    The next thing, and what I really love, is the power of this unit. Someone commented they are Indian and make stinky food... Love that! I am not Indian but I cook a lot, grill on my cast iron which always set off the smoke alarm (no longer!!!) and do make some aromatic foods. My house no longer smells like bacon all day Sunday (and hey if that's awesome just don't run it right??). While all this fantastic ventilation is happening, you CAN HOLD A CONVERSATION over by it, and I can have it on low sucking up the smells while I go sit down and watch a movie on the other side of my open concept kitchen / living room and it isn't bothersome! To put that in perspective, my crappy GE over the range microwave this replaced, was from 2007 and is that unit that like everyone and their mom and every apartment and hotel room has, only did 200 cfm on low and I think maybe 400 on high (but that is totally bogus!) and you couldn't talk anywhere near it because of how loud it was... I also love the timed shut off feature, just hit the button and walk away and it runs for like a minute or so then shuts itself down.

    So all in all, I think this unit is a GREAT value for the money. I'm very pleased with its performance, nice modern unobtrusive appearance, BV's customer service, and I would highly recommend to anyone willing to spend a little time doing a good installation. Take some care, pay attention to the details, plan on this taking a few hours to really do right, and have a helper hold it while you get it mounted. Or, you know, buy a 1500 hood and pay someone a few hundred bucks to do it for you.

    PS: I added some stainless sheet using epoxy to the inside parts of the cabinet prior to mounting and while I put up the backsplash in the picture. This not only really makes it look that much more pro but it will be way easier to clean. Just a project idea for you there... got the piece here on amazon for like $15 a side and only had to trim one inch off either one for a perfect fit.
    Images in this review
    Customer image
    Customer image
    163 people found this helpful
    Report
    Reviewed in the United States on July 22, 2018
    9 people found this helpful
    Report
    Reviewed in the United States on February 12, 2022

    Top reviews from other countries

    Chris L.
    5.0 out of 5 stars Powerful, bright, quiet and looks great
    Reviewed in Canada on December 4, 2019
    Customer image
    Chris L.
    5.0 out of 5 stars Powerful, bright, quiet and looks great
    Reviewed in Canada on December 4, 2019
    We spent about week researching a replacement hood. Read all the reviews and questions on this one and another. We chose this one because this was supposedly quieter and it's also only 8" high vs 10" on the other.
    We are not disappointed. It looks great. the 2 LED lights on the high setting is very bright. the low setting is quiet and still works great. the second setting is still quieter than our old one and the third setting is as loud as our old one but this is way more powerful.
    When you read a review about how loud this a unit is it is relative to what type a unit the person had before. You can not fairly compare noise levels to a microwave oven hood. We were coming off a dual fan Nutone. Levels range from 47db (low) to 67db (high)
    Customer service is great as I called and asked a few questions before purchasing as well as getting them to send a manual which they emailed right away.

    A couple of minor negatives. One it is not a one person install. The 2 back screws are really difficult to get in. It's not finger print resistant and the button beep is a bit loud.
    But this unit works great and is relatively quiet for the power it has.
    Images in this review
    Customer image
    Customer image
    louis
    5.0 out of 5 stars Just open the box and plug-in to feel the performance
    Reviewed in Canada on May 17, 2020
    Customer image
    louis
    5.0 out of 5 stars Just open the box and plug-in to feel the performance
    Reviewed in Canada on May 17, 2020
    As seen in the photo, I already have an electric socket right on top of my old hood next to the duct, so technically handyman can unplug the old hood and plug in the new hood without hiring an electric guy. The new hood already comes with an plug that means I can plug in any power socket and check if it works perfect without any issue before I start the installation. I ordered new cabinets which will come in a month, so I planned to open the box and hook up power to see how noisy it is, to my suprise, it's over my expectation even set to the highest speed. I think it's a good value for what I paying. I may need some wiring if I don't have a socket as in the picture, that's why I read a lot of complaints by other users. The led light is strong enough for normal cookings and have two level. The OFF button also have a built-in time delay. The twin motors are carefully designed to spin in opposit direction to offset the vibration. The left and right blades are different cause the motors spin in opposite direction, after cleaning users must be careful to put the right blade back to the right motor, left blade back to the left motor in order to function normally. Also the two blades are computer weight balanced to further reduced the vibration during high speed spinning like a wheel of any vehicle. All those things tell me this hood is a high-end designed and assembled.
    Images in this review
    Customer image Customer image Customer image
    Customer imageCustomer imageCustomer image
    One person found this helpful
    Report
    Enduser
    1.0 out of 5 stars Not Recommended
    Reviewed in Canada on September 8, 2019
    Customer image
    Enduser
    1.0 out of 5 stars Not Recommended
    Reviewed in Canada on September 8, 2019
    Looks industrial, heavy duty. good suction. If you are not a handyman it is hard to install. Hard to remove parts for cleaning and put back. All works fine until I tries to clean it like the advertise video shown, found the left fan motor move side to side, only having one screw securing it instead of 3, email dealer with photos and request to have the 2 missing screws, they send me wrong screws, dealer don't have much product knowledge. Email again with no response, I am still looking all over town for screws that fit. too late to return because already installed the unit. I don't recommend this product, but you might have better "luck". Would've rate it 4 stars if screws aren't missing. Need 2 screws like the photo.
    Images in this review
    Customer image
    Customer image
    3 people found this helpful
    Report
    Parvesh
    4.0 out of 5 stars A nice unit- installing this is tricky.
    Reviewed in Canada on November 4, 2019
    Restricted.
    4.0 out of 5 stars Great air flow, but LED conked out after 8 months.
    Reviewed in Canada on January 23, 2021