- 2 VIDEOS
Image Unavailable
Color:
-
-
-
- To view this video download Flash Player
PCCOOLER 120mm Case Fan 3 Pack Computer Case Fans PWM Cooling PC Fans,Dual Light Loop Quiet Fan/Multiple Light Modes with Controller for PC Cases
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Product Dimensions | 4.7"L x 4.7"W x 0.98"H |
Brand | PCCOOLER |
Power Connector Type | 4-Pin |
Voltage | 12 Volts |
Wattage | 2.4 watts |
Cooling Method | Air |
Compatible Devices | Desktop |
Noise Level | 29 dB |
Material | PBT Engineering Plastic |
Maximum Rotational Speed | 1800 RPM |
About this item
- 【Intelligent Speed Control-Upgradeable to 4-in-1 kit】 3 ×120mm full function PWM fans. The intelligent temperature control mute module controls the speed at 1000~1800±10% RPM. Please order a single supplement fan in the variant if you want to upgrade this to 4 pack.
- 【Dual Light Loop Design】Addressable RGB LEDs can be controlled - 6 light speeds 10 lighting modes 6 different colors and provide colorful streamer lighting effects.
- 【Shockproof Design】8 silicone shockproof pads ensure that the fan will not vibrate when it is running.
- 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs.
- 【Wide Compatibility】5v 3pin RGB lights connector, 4 pin PWM power connector. The fan is 12v, the RGB is 5v, please connect to the 5v 3 pin motherboard header. Suitable for water cooling and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc) Tips: If you want to connect a 12V motherboard, please use the controller to control the fan light. Then connect the controller to the power supply.
Frequently bought together
Similar items that may ship from close to you
- PCCOOLER 120mm ARGB Case Cooler Fan, 3 Pack FX120 ARGB Computer Case Fans, Aura +5V/3 PIN Addressabel Fans Advanced Lighting Customizations - PWM High Performance Cooling Fan for PC Case Computer FanFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- Antec 120mm Case Fan, RGB Case Fans, 5 Packs RGB Fans, PC Fan, 4-PIN RGB, F12 SeriesFREE Shipping by AmazonGet it as soon as Monday, Apr 1
- CONISY RGB LED Series 120mm Case Fan for Computer Case, Unique Ultra Quiet Long Life Gaming PC Cooling Fan - Colorful (2Pack)Amazon's Choicein Computer Case FansFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
Product details
- Is Discontinued By Manufacturer : No
- Product Dimensions : 4.7 x 4.7 x 0.98 inches; 1.23 Pounds
- Item model number : PC-3M120
- Date First Available : October 22, 2018
- Manufacturer : PCCOOLER
- ASIN : B07J5RSF37
- Country of Origin : China
- Best Sellers Rank: #517 in Computer Case Fans
- Customer Reviews:
Important information
Safety Information
Please read the quick install guide before installing. For the RGB cable sync setting, please connect standard 3pin-4position ARGB connector to motherboard's 3pin-4position ARGB port. Or use gigabyte VDG adaptor cable can switch 3pin-4position ARGB female connector to VDG 3pin ARGB port. 5V VDG connector should be connected with motherboard's VDG pin strictly according to the position. Please do not connect 5v 3 pin ARGB connector to the 12v 4 pin motherboard header. For sync with ARGB mini controller, please connect standard 3pin-4position ARGB female connector to ARGB mini controller's 3pin-4position ARGB port, then connect controller's molex female power connector to PSU's molex port.
Product Description
One of Top Leader in Case Fans
PC-3M120 Moonlight Series uses ARGB dual light loop design, provides powerful color variations and mute effects to make your computer case unique.
3 x 120MM Full Function PWM Fans
The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep fans quiet.
Extreme cooling to keep your game running smoothly and extend your computer life.
|
|
|
---|---|---|
SilentPro 9 Fan Blades9 fan blades and the surface airflow guide groove is used to process a large amount of air and concentrate the wind on the leading edge of the blade for higher wind pressure and quieter. |
Hydraulic Bearing TechnologyHydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency. Life expectancy can exceed 30,000 hours. |
Double-sided SiliconeThe fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads which can make the internal operation of the computer case stably and reduce the noise output. |
PCCOOLER: One of Top Leader in Case Fans
Full Function PWM Fan
PC-3M120 RGB LED computer case fans including 3 × 120mm full function PWM addressable fans. The intelligent temperature control mute module controls the speed at 1000~1800±10% RPM.
Suitable for Water / Liquid Cooling
Support 120/240/360mm radiators and Motherboard ARGB (+5V/3Pin).
Motherboard software synchronization mode to build your own lighting control system. The fan cable is 60cm long, compatible with most computer case and suitable for gamers.
These PWM pc cooling fans support ASUS, Gigabyte, MSI main software synchronization control. Connect standard 3pin-4position ARGB female connector to motherboard's 3pin-4position ARGB port.
Package Contents:
3 x 120mm Corona PWM Fans
12 x Fan Screws
1 x Install Instruction
1 x ARGB Controller
1 x 1-To-3 Fan Strip Cable
1 x 1-To-4 RGB Bifurcate Cable
1 x Gigabyte VDG Adaptor Cable
PC-3M120FRGB | PC-5M120FRGB | PC-3M120HALO | PC-3M120FRGB 1 Pack | PC-3M120HALO 1 Pack | PC 140MM CASE FAN | |
---|---|---|---|---|---|---|
Add to Cart
|
Add to Cart
|
Add to Cart
|
||||
Customer Reviews |
4.4 out of 5 stars
2,507
|
4.4 out of 5 stars
2,507
|
4.4 out of 5 stars
696
|
4.1 out of 5 stars
59
|
4.3 out of 5 stars
245
|
4.3 out of 5 stars
245
|
Fan Speed | 1000-1800±10% RPM | 1000~1800±10% RPM | 1000-2000RPM±10% | 1000-1800±10% RPM | 1000-2000RPM±10% | 1000~1800±10% RPM |
Fan Size | 120mm / 3 Pcs | 120mm / 5 Pcs | 120mm / 3 Pcs | 120mm / 1 Pcs | 120mm / 1 Pcs | 140mm / 1 Pcs |
PWM Funcation | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
LED/RGB | ARGB | ARGB | ARGB | ARGB | ARGB | ARGB |
Noise Level (dBA) | 31.4 ±10% dBA Max | 31.4 ±10% dBA Max | 29.1±10% dBA Max | 31.4 ±10% dBA Max | 29.1±10% dBA Max | 30±10% dBA Max |
Airflow (CFM) | 54.51 CFM Max | 54.51 CFM Max | 72 CFM Max | 54.51 CFM Max | 72 CFM Max | 78 CFM Max |
Motherboard Header | 5V 3-Pin | 5V 3-Pin /12V 4-Pin | 5V 3-Pin | 5V 3-Pin | 5V 3-Pin | 5V 3-Pin |
Control method | Controller/Motherboard | Controller/Motherboard | Controller/Motherboard | Motherboard | Motherboard | Motherboard |
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, performance, appearance and value of the electronic component fan. For example, they mention that it's well built, works flawlessly and that the colors and patterns are really nice. That said, opinions are mixed on noise, brightness and cables.
AI-generated from the text of customer reviews
Customers like the quality of the electronic component fan. They say it is well built, sturdy, and of good quality. Some customers are impressed with the quality and durability of the fans. They also mention that the fans don't feel like cheap plastic and are well cast.
"...Fin quality seems far sturdier, granted they are on Hydrolic bearings so they won't last as long as the nice brands usualy will...." Read more
"...The feel of them doesn't feel cheap at all, they actually have some weight to them, the color and patterns are really nice and have a decent..." Read more
"...custom wiring, allows for 100% unique RGB layouts, and no modifications to the actual fans was needed either. Just how they all wire up...." Read more
"...'re noticeably heavier than other fans I've used, and the build quality seems very good as well...." Read more
Customers like the performance of the fans. They say that they look great, and sound great. Some customers also mention that the fans work flawlessly with Asus Aura and Mystic Light. The vibration pads do an amazing job at absorbing any vibrations. Overall, customers are satisfied with the performance and functionality of these fans.
"...they can also be controlled by her msi MB...." Read more
"...This custom controller combined with custom wiring, allows for 100% unique RGB layouts, and no modifications to the actual fans was needed either...." Read more
"...- The remote has a setting for motherboard controlled fan speed...." Read more
"...Overall: Overall I think these fans perform great, look great, and feel great. For the price you can't beat the quality they give you...." Read more
Customers are satisfied with the appearance of the electronic component fan. They mention that the color and patterns are really nice, the sleek ring-style lights have a great visual effect, and the colors match well. The LEDs look clean and the light is dispersed enough that you cannot see them. The pattern configuration plus thoughtful design in functionality makes them great to see on both sides.
"...Still looks very nice mostly though, and for a decent price...." Read more
"...at all, they actually have some weight to them, the color and patterns are really nice and have a decent brightness to them..." Read more
"...are very vibrant and bright and with the 2 rings make them great to see on both sides. Most rgb fans the LEDs can not be seen well on the back side...." Read more
"To start with, they look good. The LEDs are bright, the fans move air. With the remote, and you can set it to a bunch of different effects...." Read more
Customers are satisfied with the value of the electronic component fan. They mention that it is a good and inexpensive replacement for your case fans. Customers are also impresseded with the bright colors and performance, saying that it feels like expensive Corsair fans.
"...Still looks very nice mostly though, and for a decent price...." Read more
"...you're looking for rgb fans with nice lighting, good airflow at a decent price then these are the ones to get." Read more
"...This is a high-end fan kit at a great price...." Read more
"...With so many rgb options and the great rings on these they are priced amazingly." Read more
Customers find the installation instructions for the electronic component fan easy to follow. They say the attachments are fragile, but they hook up easily. Customers also mention that the hardware is there and the instructions are clear. They also mention the fan is easy to wire up to the hub and the RGB controller is easy learn.
"...Comes with 3-pin and 4-pin ARGB connector and instructions are fine, comes in English and I think also Chinese...." Read more
"...Installation was pretty easy, though you'll get a snakes den of cables to manage when it comes time to button up the case...." Read more
"...I will be removing a star, due to a lack of ease of use and the cheap controller that has to be used...." Read more
"...4. they are true PWM fans and are quiet5. Install was straightforward, but there are some caveats which I will get into below...." Read more
Customers are mixed about the noise of the electronic component fan. Some mention that it sounds pretty quiet, while others say that it makes some noise. The rubber pads keep the noise to a minimum, and the humming is real. However, some customers say that the fans are a tad bit noisier than the Fractal GP-12s they had in there. The medium and high speeds can be a bit noisy, but with headphones on you can barely hear them. The fans get loud at 100%, and are noticeable without music or gaming sounds at 50%.
"...noise, it has Low, Medium and High fan settings and the low settings is pretty friggin quiet, while the upper 2 are pretty noisy...." Read more
"...on full speed which is around what they say 1800rpm these things aren't to loud at least quieter than the noctua fans I have in my PC...." Read more
"...The fans get loud at 100%, noticeable without music/gaming sounds at 50%, and barely a whisper at the lowest setting. For what you're..." Read more
"...4. they are true PWM fans and are quiet5. Install was straightforward, but there are some caveats which I will get into below...." Read more
Customers are mixed about the brightness of the electronic component fan. Some mention that the lighting is pretty bright and dispersed enough that you cannot see it. However, others say that the LED RGB rings are pretty but do not put out much light at all. Some customers also run into issues with the RGB lighting, saying that the fans straight up will not light up and that the light switch effect is more like a light bulb.
"...So in the end if you're looking for rgb fans with nice lighting, good airflow at a decent price then these are the ones to get." Read more
"...I liked the subtle effect of the ring LED, and 2) I liked that these fans have their own control...." Read more
"...As for the RGB itself, it doesn't have that many RGB LEDs so on slower settings it's obvious they cheaped out there a little as it sorta stutters..." Read more
"To start with, they look good. The LEDs are bright, the fans move air. With the remote, and you can set it to a bunch of different effects...." Read more
Customers are mixed about the cables. Some mention that the cables are sleeved nicely, keeping them neat and from getting tangled. They also say that the wires provided with the kit are extra long, so you can really hide them. However, others say that it was a little mess and the through cabling on it makes no real sense.
"...Wiring can get confusing and tedious to cable manage but that comes with the territory of this kind of setup, and in the end was mostly..." Read more
"...Keeps the cables neat and from getting tangled.Rgb: These fans have 10 modes that you can cycle through...." Read more
"...These fans seem a little thicker at the mounting points than your standard fan...." Read more
"...This means you cannot easily connect fans to different PWM connectors on your motherboard - they assume you want to controll ALL case off of one,..." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
I felt confident screwing into them, where with other brands it feels like it will strip out the plastic too easily.
RGB button lets you switch to ARGB controlled by my Asus ROG Strix B450-f gaming motherboard via 12vGRB(RGB) header.
This board has 2 12vGRB headers, 1 I used for the Wraith Prism.
Still trying to get iCue to controll it all properly, but my problems rn are with Corsair's and Asus's softwares, not the fans themself.
As for noise, it has Low, Medium and High fan settings and the low settings is pretty friggin quiet, while the upper 2 are pretty noisy. Granted, I'd only turn it up if I was doing heavy loads like gaming or overclocking.
If gaming, I'd likely have headphones on anyways, listening to music so not an issue for me.
Fin quality seems far sturdier, granted they are on Hydrolic bearings so they won't last as long as the nice brands usualy will.
Overall feels nicer than my other ones.
As for the RGB itself, it doesn't have that many RGB LEDs so on slower settings it's obvious they cheaped out there a little as it sorta stutters (choppy movement) on some lighting modes.
Still looks very nice mostly though, and for a decent price.
Remote comes with spare battery too.(although I doubt I'll use it enough to matter)
Comes with 3-pin and 4-pin ARGB connector and instructions are fine, comes in English and I think also Chinese.
Comes with velcro sticky pads, making it easy to adjust or remove the controller box.
Wires are plenty long and of decent quality.
Fans barely cleared a few spots but fit well enough, even in a smaller case like NZXT H510.
Wiring can get confusing and tedious to cable manage but that comes with the territory of this kind of setup, and in the end was mostly painless.
Overall: 5-star for cheap fan standards, 4-star compared to $30/each fans but what do you expect.
Will buy again, and will update if anything goes wrong.
Reviewed in the United States on February 24, 2021
I felt confident screwing into them, where with other brands it feels like it will strip out the plastic too easily.
RGB button lets you switch to ARGB controlled by my Asus ROG Strix B450-f gaming motherboard via 12vGRB(RGB) header.
This board has 2 12vGRB headers, 1 I used for the Wraith Prism.
Still trying to get iCue to controll it all properly, but my problems rn are with Corsair's and Asus's softwares, not the fans themself.
As for noise, it has Low, Medium and High fan settings and the low settings is pretty friggin quiet, while the upper 2 are pretty noisy. Granted, I'd only turn it up if I was doing heavy loads like gaming or overclocking.
If gaming, I'd likely have headphones on anyways, listening to music so not an issue for me.
Fin quality seems far sturdier, granted they are on Hydrolic bearings so they won't last as long as the nice brands usualy will.
Overall feels nicer than my other ones.
As for the RGB itself, it doesn't have that many RGB LEDs so on slower settings it's obvious they cheaped out there a little as it sorta stutters (choppy movement) on some lighting modes.
Still looks very nice mostly though, and for a decent price.
Remote comes with spare battery too.(although I doubt I'll use it enough to matter)
Comes with 3-pin and 4-pin ARGB connector and instructions are fine, comes in English and I think also Chinese.
Comes with velcro sticky pads, making it easy to adjust or remove the controller box.
Wires are plenty long and of decent quality.
Fans barely cleared a few spots but fit well enough, even in a smaller case like NZXT H510.
Wiring can get confusing and tedious to cable manage but that comes with the territory of this kind of setup, and in the end was mostly painless.
Overall: 5-star for cheap fan standards, 4-star compared to $30/each fans but what do you expect.
Will buy again, and will update if anything goes wrong.
After watching a review from bitwit on YouTube about these we decided to give them a try, we got the 5 pack at only 60 bucks, so if they were junk wasn't a total loss. The fans arrived in 2 days, got them installed and I have to say I was pretty impressed with them. The feel of them doesn't feel cheap at all, they actually have some weight to them, the color and patterns are really nice and have a decent brightness to them(she only has these rgb fans and the inside of the case lights up pretty decent) they can also be controlled by her msi MB. The airflow on these is pretty good also and keep her case pretty cool, on full speed which is around what they say 1800rpm these things aren't to loud at least quieter than the noctua fans I have in my PC.
The only thing I didn't like were how the wires that came out of the fan for the fan control and rgb were wrapped together in the same loom, made it a little hard to get everything in the back of the case nice, but I'm not gonna take a star away for that.
So in the end if you're looking for rgb fans with nice lighting, good airflow at a decent price then these are the ones to get.
Each fan LED in the line is actually uniquely addressable. All these 5v "3-pin" RBG devices are really just WS2812B devices under the hood, just like the common 5v addressable LED strips that are 5v 4-pin ARGB. So you can use much more exotic effects if you wire up your fans in serial, which you can do if you have all 4-pins available.
Do note that this requires some custom wiring and associated skills, but its great that these fans include all 4-pins so you can connect them in serial. Otherwise, like most motherboard "5v 3-pin" all the fans do the same effect, which is fine, but already dated compared to what you can do if each LED on each fan is uniquely addressable down the line.
It makes sense they force the "3-pin" paradigm to try to help people from accidentally plugging in an older 12v 4-pin RGB fan into the newer 5v 3pin standard. But the 5v 3-pin standard actually SHOULD have that 4th pin to connect these things in serial; just like the RGB led light strips they are built with.
Great fans too, high pressure, high CFM ratings. The included controller is a little intimidating to figure out the wiring for novices, but is simple enough.
The FAN controller is great too. It passes through the motherboards PWM signal to all attached fans, but the power comes from the SATA connector to avoid over-loading the single motherboard output. The RPM reading is read only from the 1st fan in the chain, but since all these fans are identical, the reading the motherboard gets will reflect all the attached fans. This is the right way to wire up multiple fans to a single header, good to see they've done it right in the controller.
You can also bypass the PWM entirely, and just use the High-Med-Low control on the remote.
This is a high-end fan kit at a great price. I highly suggest the 5-pack for advanced usage and possibilities with the 4-pin fans connections for the ARGB (which is technically seen as proprietary in the PC world, but is actually the standard for 5v ARGB LED light strips). And I suggest the 3-pack for beginner and normal ARGB usage because of the normal "standard PC 3-pin 5v ARGB" connections on all the included fans. But note these will forever be limited to parralel wiring where each fan's LEDS will always be doing the same thing relative to each other. No option for individual addressing across fans.
You can convert the 5-pack's 4-pin connector to a 3-pin connector just fine, but not vice-versa, so the 5-pack would be recommended if you think you'll ever want to start doing more advanced ARGB setups and effects.
Take note the controller by default starts up each time with its internal default settings. You can override this and "lock" your settings for each startup. Hold the Lock button on the remote for 5 seconds, then set your settings how you like, then press "lock" again on the remote. Now it will retain your desired boot-up settings.
In my final setup I'm actually bypassing the motherboard and this ARGB controller entirely, and controlling these with custom ARGB wiring in serial, which was easy to do since all 4-pins are available at each fans 5v ARGB connector. The 5v ARGB input connects to an ESP32 running WLED software which uses the FastLED library for TONS of advanced effects compared to what motherboard software lets you do. This custom controller combined with custom wiring, allows for 100% unique RGB layouts, and no modifications to the actual fans was needed either. Just how they all wire up. ESP32's are about $10, and the WLED software is opensource/free. So go to town and do something unique with all these addressable LEDs!
Top reviews from other countries
I did have an issue where one controller of the three I purchased was not registering on the motherboard so I could use pwm mode. Hopefully the replacement works fine. Edit: turns out the pwm fan cable that comes with the controller was the issue. new cable fixed it. Other then that that these are amazing fans. Well built, solid, heavy and a great value.
Reviewed in Canada on January 24, 2021
I did have an issue where one controller of the three I purchased was not registering on the motherboard so I could use pwm mode. Hopefully the replacement works fine. Edit: turns out the pwm fan cable that comes with the controller was the issue. new cable fixed it. Other then that that these are amazing fans. Well built, solid, heavy and a great value.
I have been using for 1month now, So durability wise Idk yet, but they are high quality so it should be fine.
Reviewed in Canada on October 15, 2020
I have been using for 1month now, So durability wise Idk yet, but they are high quality so it should be fine.
リモコン使わずにマザボ直挿しできます。
私はそうしてます。
一色に光らせることもできます。
ファンの音はしますが、許容範囲です。
連結コードがあるので一つでもコネクタがあれば3つ全て使うことができます。
Reviewed in Australia on January 18, 2020