Brand | Nilight |
---|---|
Color | Silver and black |
Specific Uses For Product | Head Lights |
Vehicle Service Type | Car |
Special Feature | High Beam |
Auto Part Position | Inner |
Lens Color | Clear |
Item Dimensions LxWxH | 9.2 x 6.9 x 4.3 inches |
Manufacturer | Nilight |
Model | 10041P |
Item Weight | 1.72 pounds |
Product Dimensions | 9.2 x 6.9 x 4.3 inches |
Country of Origin | China |
Item model number | 10041P |
Is Discontinued By Manufacturer | No |
Exterior | Chrome |
Manufacturer Part Number | 10041P |
Special Features | High Beam |
Mirror Lighting Type | automotive-exterior-headlight-bulbs |
Other Sellers on Amazon
100% positive over last 12 months
Nilight 2.5" LHD H1 Bi-xenon HID Projector Lens Low High Beams with Shrouds For H4 H7 H11 9005 9006 9007 H13 Headlight,2 Years Warranty
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Brand | Nilight |
Color | Silver and black |
Specific Uses For Product | Head Lights |
Vehicle Service Type | Car |
Special Feature | High Beam |
Auto Part Position | Inner |
Lens Color | Clear |
Item Dimensions LxWxH | 9.2 x 6.9 x 4.3 inches |
|
|
About this item
- Compatible with most H4/H7/H11/9005/9006/9007/H13 housings with modifications. Fit in tight spaces for quad retrofits or foglamp upgrade
- Type of Light Bulb: H1(Light Bulb is not included in package), ONLY WORKS WITH H1 HID KITS,Doesn't work with LED or other sizes.
- Color: Chrome Housing + Clear Lens, Shrouds Color: Chrome, Cut-off: Left Hand Drive Only
- Adapter Plate Type: H4 / H7, Thread Length: 2.5cm) Connection Mode: Red (+) Black (-).
- Package Includes: 2X Mini Bi-xenon projector Lens (Low/High Beams) + 2X Shrouds + 2 Sets of Installation Accessories(lock rings, h7/h4 adapter plates, rubber crush Washers). 2 Years Warranty Honored by Nilight.
Frequently returned item
Check the product details and customer reviews to learn more about this item.
Frequently bought together
From the brand
-
Our story begins in 2014. We have specialized in automotive LED aftermarket lighting products for many years. Nilight's goal is dedicated to developing cost-effective and quality products. Every LED product we design and sell is intended to be a surpassing lighting solution for our customers
-
-
-
-
From the manufacturer
About us
Nilight 2.5 Inch Retrofit Projector Lens was designed to stylish/upgrade your headlight, also to improve the visibility for your night driving, thus reduce traffic accident caused by bad weather and road condition.
Fitment:
Fit for H4/H7 directly with Adapter Plate Type: H4 / H7
Fit for H11/9005/9006/9007/H13 housings with modifications (Left Hand Drive only)
Type of Light Bulb: ONLY WORKS WITH H1 HID KITS,Doesn't work with LED or other sizes.
Package includes:
2x brand new mini bi-xenon projector lens (low/high beams),
2x sets of installation accessories (lock rings, h7/h4 adapter plates, rubber crush Washers),
2x shrouds (for gift).
- xenon (high/low beam) tested:A magnetic Bi-xenon cut-off line built inside for low beam and high beam switching, pictures represent actual item you Will receive, the chrome shroud 100% fitment matched
- Fit for LHD --- Fit in tight spaces for quad retrofits or foglamp upgrade
- Since bake/open headlamps are required, Professional installation is highly recommended!
Key Features
|
|
|
|
---|---|---|---|
High Beam & Low Beam AdjustmentGobo inside ithe lens are used to adjust high beam and low beam. When the gobo is closed, projector lens show a low beam; When it is open, projector lens shows a high beam; |
Clear LensEach projector lens has a 2.5 inch clear lens in mint condition. Reflects the best lighting output! |
Installation accessoriesFit with bulb model H1, also come with adapter plates' type that can be fitted with H4 and H7. |
Premium Quality MaterialsNilight projector lens are made of premium quality ABS shrouds, metal housing, and real glass lens to ensure great durability and long lifespan of the lens. |
Applications
|
|
|
|
---|---|---|---|
|
|
|
|
Why Choose Nilight
|
|
|
---|---|---|
All Nilight lightings output super bright light to improve your visibility and safety at night ride or night time work. |
All Nilight products are made of carefully-selected materials and pass through strict quality checks to ensure each of you gets superior quality. |
We are dedicated to providing the quickest reply, the most professional tech suppor t, and awesome solutions to ensure your satisfaction. |
Product Description
H1 mini bi-xenon projector hid Kits, fit in tight spaces for quad retrofits or fog lamp upgrade. Package include: 2x brand knew mini bi-xenon projector lens (low/high beams), 2x sets of installation accessories (lock rings, h7/h4 adapter plates, rubber crush Washers), 2x shrouds (for gift). Product description: 2.5 inch clear lens in mint condition, the chrome cover 100% fitment matched, inner bowl is brand knew no damage, xenon (high/low beam) tested: perfect, pictures represent actual item you Will receive, the chrome shroud 100% fitment matched, bulb and ballast are not include, bulb's type: h1, adapter plates' type: h4/ h7. Fit for LHD. There are no instruction in the box, professional installation is highly recommended.
Product information
Technical Details
Additional Information
ASIN | B00B21R0TA |
---|---|
Customer Reviews |
3.9 out of 5 stars |
Best Sellers Rank | #13,106 in Automotive (See Top 100 in Automotive) #33 in Automotive Headlight Assemblies |
Date First Available | January 17, 2013 |
Warranty & Support
Feedback
What's in the box
Product guides and documents
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, value, brightness and appearance of the vehicle light assembly. For example, they mention the solenoids work great, the cut-off is crisp and the projectors work surprisingly well for their price. Some are happy with appearance, and projection. That said, opinions are mixed on ease of installation, cutoff, and fit.
AI-generated from the text of customer reviews
Customers like the quality of the vehicle light assembly. They mention that the solenoids work great, the cut-off is crisp, and the projectors work very well. Some say that the threads didn't tighten all the way. Overall, most are satisfied with the quality and performance of the product.
"...Now that I have my the headlights in my car, these bad boys perform excellently...." Read more
"...The projectors felt solid and very well made. They seem to be one of the better generic Mini H1 projectors on the market...." Read more
"...Update. Morimoto bulb holders work great with this. Couple months in with 55 watt hid and no issues." Read more
"...Overall, the kit works, and functions. Yes it's cheap too...." Read more
Customers are satisfied with the value of the vehicle light assembly. They mention it's a decent product for the price, looks expensive once installed, and is a nice cheap alternative to what the TRS website offers. Overall, most are happy with their purchase and recommend it to others.
"...All things said, these projectors are a good value as long as you put in the extra time for fine tuning that is, if you want better lighting than..." Read more
"If you don't like puzzles spend a bit more money. These are incredibly affordable but given no instructions they are some guesswork...." Read more
"...and reach as far as 4-5 cars ahead of you as well, overall good projectors for the price, definitely a must consider if you're in the market for..." Read more
"...I can say that these are very nice projectors for the price. Package was simple:2 H1 mini projectors2 shrouds..." Read more
Customers like the brightness of the product. They say the light output is amazing, the high beam is awesome, and the good light pattern works great. The low beams are great and help them see better at night. Customers also mention that the projectors provide for great night driving.
"...I recently drove a family members new Lexus and the projectors provide for great night driving...." Read more
"...The low beams are great but having two sets of high beams per side is really the main reason I wanted to do this...." Read more
"...Definitely bright on Hi beam, not so much on low beam." Read more
"...A test drive confirmed a fairly dim low beam with lackluster distant illumination...." Read more
Customers are satisfied with the appearance of the vehicle light assembly. They mention that it looks good, provides nice lighting, and has a simple design. Some appreciate the color, quality of light, and beam pattern. Overall, most are happy with their purchase and recommend it to others.
"...For HID's, I went with 8000k from a seller on Amazon and the color is wonderful...." Read more
"...Chrome bowls look very smooth and no gritty texture as I've seen in some other generic Mini H1 projectors...." Read more
"...is crisp with a tad bit of rainbow in it at further distances, they look great and high quality...." Read more
"...But garentee the next set I'd get would be the same. Yes look good and easy to install...." Read more
Customers like the projection of the vehicle light assembly. For example, they say it's a great projector retrofit, with a sharp cutoff line and good projection. Some mention that the beam pattern output is decent.
"...mini h1 7.0 and while it definitely feels more solid, this projector kit is great and I'll likely buy another set to have on hand before prices go up..." Read more
"...Frontward visibility is outstanding! I used a 5k hid bulb for that oem white hid hue of light and it is fantastic. I have no complaints in this area...." Read more
"...Enough side to side projection of light although it could be better...." Read more
"TLDR; these projectors are junk, look a lot worse than stock halogens with a foggy lens, and retrofitting headlights is a very time consuming process..." Read more
Customers are mixed about the ease of installation of the vehicle light assembly. Some mention that it's super easy to install and retrofit, with minimal modification needed. However, others say that it was confusing to get installed, requires many tools, and was very time consuming.
"...Installation was pretty straight forward. All hardware and mounting accessories needed were included...." Read more
"...Fitment: This will vary from user to user but my retrofit process went smoothly...." Read more
"...It was a very time consuming and labor-intensive process to open the headlight assembly and install these, even as someone with a lot of mechanical..." Read more
"...retrofit headlight build on a 05 vw jetta, the product is easy to install and put together, one complaint would be the hole for the HID could be a..." Read more
Customers are mixed about the cutoff of the vehicle light assembly. Some mention that it's excellent, sharp, and does the job. However, others say that the cutout is out of focus, fuzzy, and dispersed. They also say that it is not consistent and gives off a different diffraction color.
"...They also have a sharp cutoff with some color. It could use more color, but it's not bad...." Read more
"...The right projector has a jagged Z-shaped line that only goes 10ft out from my car then cuts off completely...." Read more
"...The solenoids work great, the cut-off is crisp with a tad bit of rainbow in it at further distances, they look great and high quality...." Read more
"They have a decent cut and good quality for the price would be great for a budget headlight...." Read more
Customers are mixed about the fit of the vehicle light assembly. Some mention that it fits right, has a decent width, and is very similar in size and shape to the Morimoto mini H1. However, others say that it didn't fit their suburban, the lens body was too big for the housing, and the cutoff plate to actuator was too narrow to fit the motor assembly.
"...The threaded base of the projector is a little too short, and the nut that holds it in place is such low quality metal that my needle nose pliers..." Read more
"...They fit perfectly in my 2002 Altima 3.5 which have a decent amount of space in them...." Read more
"...They were not a direct fit because for some reason the projector bulb holes were slightly smaller than the bulb base...." Read more
"...Fits perfectly on 9th gen civics (and should fit any 9006 low beam) with no cutting needed...." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
shrouds screw in which is nice vs using jb weld and risking getting it all over everything.
Fits perfectly on 9th gen civics (and should fit any 9006 low beam) with no cutting needed. I used an innovited 55w kit,h1 5000k bulbs, and wiring harness that matched my car wiring (9006) , some high beam splitters, and some adapters for the solenoid(in order to use factory high beams along with projector high beams) and I'm happy with it so far. From baking open headlights to completing the retrofit it took me a total of 3 hours (i painted mine so i let them dry overnight before resealing them). Will update if any issues arise.
Hardest part was leveling the headlights. I made sure all tire pressure was good and car was level and used a brick wall to confirm them tightened down everything and sealed it up.
The low beams are great but having two sets of high beams per side is really the main reason I wanted to do this. Using lasfit 9005 high beam leds paired with the projector hi/low beams and its amazing how much you can see at night.
*update: swapped innovited bulbs for morimoto and they're much brighter and have more bluish color flicker. Also testing morimoto h1 bulb holders on these projectors and will update my findings.
Update. Morimoto bulb holders work great with this. Couple months in with 55 watt hid and no issues.
shrouds screw in which is nice vs using jb weld and risking getting it all over everything.
Fits perfectly on 9th gen civics (and should fit any 9006 low beam) with no cutting needed. I used an innovited 55w kit,h1 5000k bulbs, and wiring harness that matched my car wiring (9006) , some high beam splitters, and some adapters for the solenoid(in order to use factory high beams along with projector high beams) and I'm happy with it so far. From baking open headlights to completing the retrofit it took me a total of 3 hours (i painted mine so i let them dry overnight before resealing them). Will update if any issues arise.
Hardest part was leveling the headlights. I made sure all tire pressure was good and car was level and used a brick wall to confirm them tightened down everything and sealed it up.
The low beams are great but having two sets of high beams per side is really the main reason I wanted to do this. Using lasfit 9005 high beam leds paired with the projector hi/low beams and its amazing how much you can see at night.
*update: swapped innovited bulbs for morimoto and they're much brighter and have more bluish color flicker. Also testing morimoto h1 bulb holders on these projectors and will update my findings.
Update. Morimoto bulb holders work great with this. Couple months in with 55 watt hid and no issues.
For comparison, I recently drove a family members new Lexus and the projectors provide for great night driving. With that being said, these Nilight 2.5 Mini projectors and some good HID's (I paid $60 for the bulbs and ballasts) seem to perform better. The beam is wider allowing you to see off to the side with ease. This could be hysteria but they are excellent regardless.
One absolute pisser at the time was that the screws holding the bulb mount to the back strip way to easily. Of the three on each projector, only two of the screws came out without issue. Be prepared to use a deep, thin precision flat head despite them being phillips screws (sorry I do not have the driver size in front of me at the time).
--
Purchased these to retrofit a new set of headlights for 2000-2004 Subaru Legacy. It was a very time consuming and labor-intensive process to open the headlight assembly and install these, even as someone with a lot of mechanical and craft experience. Thankfully, minimal cutting was required and I just had to open a hole for the high beam wires.
I marked the top-center of the projector lens so I could get it level and at the correct orientation. Carefully secured and tightened everything, triple checked my work. The way it attaches with the washers to the back of the headlight assembly isn't great, as the rubber gasket was too small and left a gap. The threaded base of the projector is a little too short, and the nut that holds it in place is such low quality metal that my needle nose pliers dug right into it and shaved part of it away.
Okay, at this point it looks decent and I re-seal the headlights and begin the install of the HIDs. Spent a couple hours making a wiring harness. Get it all installed and finally working, then test the lights when it's dark. They look horrible. The right projector has a fuzzy blob as its output. The right projector has a jagged Z-shaped line that only goes 10ft out from my car then cuts off completely. It is embarrassing to drive like this.
Now I test the high beams. It looks okay with the shutter open but not nearly as bright or defined as stock halogens in 20yr old housings. Frustrated, I switch the HIDs out with the stock halogen H1 bulbs, which I know are solid. Just as bad. I try to aim the lights and adjust the clip holding them in, nothing improves, and the clip that holds the bulb in is weak and it wiggles. It appears the left shutter is completely defective and isn't a straight line.
I was hoping to get a refund and just switch back to the beat up stock headlights but there's no way I'm going through hours of labor just to remove the projectors from the headlight assemblies, to get $30 back. So that is part of the business model probably.
Top reviews from other countries
There were no fitment issues in my case as well and no shimming needed like some people noted. Install these straight and make sure they are level. You can use the stock headlights aiming screw for the rest.
Highly recommended. Hopefully they last a reasonable amount of time.
Reviewed in Canada on October 3, 2022
There were no fitment issues in my case as well and no shimming needed like some people noted. Install these straight and make sure they are level. You can use the stock headlights aiming screw for the rest.
Highly recommended. Hopefully they last a reasonable amount of time.
Reviewed in Mexico on July 5, 2023