Brand | DC HOUSE |
---|---|
Color | Silver-black |
Material | Stainless Steel |
Style | Above Ground |
Product Dimensions | 22.5"L x 8.5"W x 8.5"H |
Power Source | Battery Powered |
Item Weight | 35 Pounds |
Maximum Flow Rate | 15 Liters Per Day |
Maximum Lifting Height | 15 Feet |
Voltage | 12 Volts |
Manufacturer | Fisters |
Part Number | L11020101011-1 |
Item Weight | 35 pounds |
Country of Origin | China |
Item model number | L12t160123YYDLDY15-1 |
Is Discontinued By Manufacturer | No |
Size | 15 Quart Double |
Item Package Quantity | 1 |
Included Components | 1pc Dump Trailer Remote Control Switch |
Batteries Included? | No |
Batteries Required? | Yes |
Warranty Description | 1 year manufacturer |
Other Sellers on Amazon
85% positive over last 12 months
Hydraulic Power Unit 15 Quart Double Acting Hydraulic Pump DC 12V Power Unit Metal Reservoir for Dump Trailer Car Lifting
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Brand | DC HOUSE |
Color | Silver-black |
Material | Stainless Steel |
Style | Above Ground |
Product Dimensions | 22.5"L x 8.5"W x 8.5"H |
Power Source | Battery Powered |
Item Weight | 35 Pounds |
Maximum Flow Rate | 15 Liters Per Day |
Maximum Lifting Height | 15 Feet |
Voltage | 12 Volts |
About this item
- 【One Force Lifts a Thousand Pounds】The hydraulic pump is equipped with a 12V DC motor (rated at 1.6KW) and an 15 quart/15 liter oil tank. The maximum pressure at the outlet can reach 3200PSI/22MPa with your double-acting cylinder can easily lift at least 5 tons of weight.
- 【Double Acting Hydraulic Power Units】This double-acting hydraulic pump must be used with a double-acting cylinder. The hydraulic pump will have an outlet and return port when controlling your cylinder up and down (for up: A2 for outlet and A1 for return; for down: A2 for return and A1 for outlet), so your cylinder must also have two ports to work.
- 【The King of Cost Performance】This brand new hydraulic pump is perfect for replacing your dump trailer pump, and you get a great performing hydraulic power unit for half the cost of a dump truck pump store. And it can also be used as a power unit for other hydraulic systems such as garden tractors, forklifts, stackers, small or medium-sized lifting platforms, etc.
- 【Easy to Use】This hydraulic power unit can be used directly with the controller (included) after connecting your cylinder with the oil pipe (not included) and connecting the 12V DC power supply (not included) according to the instructions. The interface type of the oil port is (9/16")SAE#6, and the suitable hydraulic oil viscosity range is 22-46mm²/s.
- 【Friendly Service】This product provides 30 days quality assurance, if there are any quality problems can be unconditionally replaced. Please leave us a message if you have any questions during use.
Frequently bought together
Similar items that may ship from close to you
- Magister Hydraulics Double Acting Hydraulic Cylinder - AG Tie-Rod Hydraulic Cylinder 2500 PSI Agriculture Standard 2" bore 16" Stroke (2x16)Amazon's Choicein Hydraulic Lifting CylindersFREE ShippingGet it Mar 29 - Apr 2
- GYZJ Hydraulic Flow Control Valve 1 Spool 11 GPM G Ports Adjustable Relief Lever Handle Double Acting Parallel Center Tractor Loader W/Joystick Small Tractors/Tanks Loaders Log Splitters 3600 PSIFREE Shipping by AmazonGet it as soon as Sunday, Mar 31
From the brand
-
In the pursuit of sustainable development.
DC HOUSE was quietly born in 2007
with a passion for DC technology.
The founders saw endless possibilities
in the field of new energy.
We are committed to providing more convenient and quality solutions for people's lives and work.
Product Description
Please Note:
1.Fill the oil tank with suitable hydraulic oil. ATF, OD18, or other clean hydraulic oil with a viscosity of 150-300 SUS at 38℃ (100℃) is acceptabe.
2. The hydraulic oil to be filled into the reservoir should be filtered and the filter precision should be no less than 25μm.
- Package Include:
- 1pc 12V Double Acting Hydraulic Pump
- 2pc Additional SAE#6 Connectors
- 1pc Dump Trailer Remote Control Switch(15FT)
- 1pc English Manual
15 Quart Double Acting Hydraulic Pump
15 Quart Metal Reservoir & Double Acting & 12V DC & 2 Additional SAE#6 Connectors
Technical Parameters:
*Item Size: 22.5"*8.5"*8.5" (LxWxH)
*Oil Tank Size: 13.4"*8.5"*8.5" (15 Quart/15 L)
*Voltage: DC 12V
*Motor Power: 1.6KW
*A1 and A2 Oil Port Pressure: 3200PSI / 22MPa
*Acting: Double-acting
*Oil Port Model: (9/16")SAE#6 Port
*Installation Method: Horizontal Mount
*Reservoir Material: Metal
|
|
|
---|---|---|
Easy to UseThis hydraulic power unit can be used directly with the controller (included) after connecting your cylinder with the oil pipe (not included) and connecting the 12V DC power supply (not included) according to the instructions. The interface type of the oil port is (9/16")SAE#6, and the suitable hydraulic oil viscosity range is 22-46mm²/s. |
Double Acting Power UnitThis double-acting hydraulic pump must be used with a double-acting cylinder. The hydraulic pump will have an outlet and return port when controlling your cylinder up and down (for up: A2 for outlet and A1 for return; for down: A2 for return and A1 for outlet), so your cylinder must also have two ports to work. |
One Force Lifts a Thousand PoundsThe hydraulic pump is equipped with a 12V DC motor (rated at 1.6KW) and an 15 quart/15 liter oil tank. The maximum pressure at the outlet can reach 3200PSI/22MPa with your double-acting cylinder can easily lift at least 5 tons of weight. |
Wide Application
|
|
|
|
---|---|---|---|
Dump Trailer |
Electric Forklift |
Lifting Platform |
Crane truck |
4 Quart Double | 6 Quart Double | 8 Quart Double | 10 Quart Double | 15 Quart Double | |
---|---|---|---|---|---|
Add to Cart
|
Add to Cart
|
Add to Cart
|
Add to Cart
|
Add to Cart
|
|
Customer Reviews |
4.2 out of 5 stars
697
|
4.2 out of 5 stars
697
|
4.2 out of 5 stars
697
|
4.2 out of 5 stars
697
|
4.2 out of 5 stars
697
|
Pressure | 22MPA | 22MPA | 22MPA | 22MPA | 22MPA |
Reservoir Capacity | 4 Quart | 6 Quart | 8 Quart | 10 Quart | 15 Quart |
Traffic | 1.1ml/r | 1.1ml/r | 1.1ml/r | 1.1ml/r | 1.1ml/r |
Rated Power | 1.6KW | 1.6KW | 1.6KW | 1.6KW | 1.6KW |
Rotating Speed | 2850r/min | 2850r/min | 2850r/min | 2850r/min | 2850r/min |
Looking for specific info?
Product information
Technical Details
Additional Information
ASIN | B07H94WGMD |
---|---|
Customer Reviews |
4.2 out of 5 stars |
Best Sellers Rank | #11,543 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #3 in Hydraulic Power Units |
Date First Available | September 12, 2018 |
Warranty & Support
Feedback
Important information
12 volts
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers are unhappy with the fit of the water pump. They mention that the fittings are wrong, foreign, or not SAE. They also say finding the correct fittings was a challenge. Opinions are mixed on ease of installation, performance, quality, and value.
AI-generated from the text of customer reviews
Customers are mixed about the performance of the water pump. For example some mention it works good and is simple to use, while others say that it suddenly stopped working. That said, some say the motor stopped working after 6 months, the unit works for 10 seconds at a time, and trips a relay. That being said, buyers beware.
"...You can add flow control external if needed.Overall functional and cost effective for converting over and much cheaper and quicker than..." Read more
"...The unit works for 10seconds at a time and trips a relay, no one can figure out out why and only path forwards is to replace the damn thing even..." Read more
"...If you want SAE, pull the fittings and replace with JIC, works great...." Read more
"...Also, this pump sometimes coasts and doesn't always act as a brake if you have a hydraulic cylinder extended with weight on it...." Read more
Customers are mixed about the ease of installation of the water pump. Some mention that it's pretty straightforward, while others say that it comes with no instructions or hard to read instructions.
"...Works as it should so far. Happy with it. Instructions are not good for very much info,but it's all pretty straightforward." Read more
"This unit did come complete with instructions but unit itself leaves a lot to be desired...." Read more
"Well having same issue as some of the others. No manual or instructions for hooking up...." Read more
"...Instructions as to battery connections were spot on. Very satisfied with the performance so far...." Read more
Customers are mixed about the quality of the water pump. Some mention it's well-made, while others say it arrived damaged.
"Product is decent. Works as needed. Couple things. Comes with no instructions...." Read more
"...On the old pump, these bolts kept breaking or coming out, due to the heavy vibration on the trailer. It had no other way to secure the pump...." Read more
"...It appeared to be good quality and likely would have worked well in another application." Read more
"...found that all of the orings and backers were installed improperly and ruined...." Read more
Customers are mixed about the value of the water pump. Some mention it's great value for the money, and cost effective for converting over. However, others say that it'd be a waste of time and money.
"...Overall functional and cost effective for converting over and much cheaper and quicker than electric actuator" Read more
"This pump is very weak! And nowhere near it's rating! The fittings are expensive they're not standard In the pump...." Read more
"...sent me all the info i needed to make it work as i wanted... Good product for the price...." Read more
"Very good pump for the price. I bought to replace mine on my bale spear. Works flawlessly. You will have to make fitting adapters...." Read more
Customers are dissatisfied with the fit of the water pump. They mention that the fittings are wrong, foreign, and not SAE. They also say that the orings and backers were installed improperly and ruined.
"...Of particular note is that the brass hose fittings provided did not match up with my hydraulic hoses and I had to search several parts stores to..." Read more
"...apart one of the selonoids I found that all of the orings and backers were installed improperly and ruined...." Read more
"...The threads are British so I went and spent 60 bucks and 2 hours getting the conversion pieces...." Read more
"Pump arrived as described. Difficulty to plumb it since the fittings were British...." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
The seller indicates it can be used in a vertical mounting position which the reviews said no. I have mine vertical and it works well,
As far as wiring it is very simple red or positive to motor relay and black or ground to motor. The nuts were actually left loose to make it more obvious.
Only negative so far is the down position does not have a check valve and in my application i need to hold at both ends of cylinder. Easy fix though a $65 2 way solenoid valve wired to be open during pump operation solves the issue. Would be nice to add some flow control but in this price range not happening. You can add flow control external if needed.
Overall functional and cost effective for converting over and much cheaper and quicker than electric actuator
Ken
I wanted to update my comments. The unit has a check valve on the pressure port. Take out the hose fitting the check valve will turn out counterclockwise with a straight screwdriver. This is a pressure activated check valve that must be set by the manufacturer for about 10000 lbs. This valve allows the hydraulic fluid to flow out at high volume, but going down or the fluid returning pushes the plunger closed slowing the descent of the hydraulic ram. I modified the check valve for my application, I have a lift table which will lift between 500-1500 lbs. This check valve is ideal because the more weight I have on the lift table the slower it descends, it is pressure activated. It works perfectly.
The unit works for 10seconds at a time and trips a relay, no one can figure out out why and only path forwards is to replace the damn thing even though its brand new.
I use this pump to operate an 18" cylinder on a tilt-bed shed delivery trailer. I searched until I found this specific model, with the box-shaped tank. The old pump on the trailer had a round tank. My old pump lasted about 3 years with nearly daily operation. Both the old and new pumps use a pair of 1" long bolts (not included) to mount, from the underside. On the old pump, these bolts kept breaking or coming out, due to the heavy vibration on the trailer. It had no other way to secure the pump. On this new pump, I added a piece of 8" channel iron to the trailer frame to support the box tank, and be able to strap it down to hopefully reduce the vibration and keep the bolts from breaking or unscrewing.
Of particular note is that the brass hose fittings provided did not match up with my hydraulic hoses and I had to search several parts stores to find hose adapters that fit. The parts store guy said the female sockets in the pump manifold were "5 boss" size. My hoses used "6 boss".
Also, this pump sometimes coasts and doesn't always act as a brake if you have a hydraulic cylinder extended with weight on it. There were some holes on the top of the pump motor housing that I was concerned might let water in, so I sealed them with RTV Silicon. This pump was mounted low on a trailer, so I sealed all the electronic parts with RTV.
I use this pump to operate an 18" cylinder on a tilt-bed shed delivery trailer. I searched until I found this specific model, with the box-shaped tank. The old pump on the trailer had a round tank. My old pump lasted about 3 years with nearly daily operation. Both the old and new pumps use a pair of 1" long bolts (not included) to mount, from the underside. On the old pump, these bolts kept breaking or coming out, due to the heavy vibration on the trailer. It had no other way to secure the pump. On this new pump, I added a piece of 8" channel iron to the trailer frame to support the box tank, and be able to strap it down to hopefully reduce the vibration and keep the bolts from breaking or unscrewing.
Of particular note is that the brass hose fittings provided did not match up with my hydraulic hoses and I had to search several parts stores to find hose adapters that fit. The parts store guy said the female sockets in the pump manifold were "5 boss" size. My hoses used "6 boss".
Also, this pump sometimes coasts and doesn't always act as a brake if you have a hydraulic cylinder extended with weight on it. There were some holes on the top of the pump motor housing that I was concerned might let water in, so I sealed them with RTV Silicon. This pump was mounted low on a trailer, so I sealed all the electronic parts with RTV.