Brand Name | N\A |
---|---|
Product Dimensions | 14 x 18.1 x 9 inches |
Country of Origin | China |
Capacity | 100 Milliliters |
Installation Type | Split System |
Part Number | 755737092636 |
Special Features | Heavy Duty |
Color | 12V |
Voltage | 12 Volts (DC) |
Wattage | 550 watts |
Batteries Included? | No |
Batteries Required? | No |
Other Sellers on Amazon
Universal Car Electric Air Conditioner Compressor 12V for Heavy Duty Truck Bus Van RV Motorhome Parking Lot Air Conditioner ... (12V)
Purchase options and add-ons
Brand | N\A |
Capacity | 100 Milliliters |
Cooling Power | 8875 British Thermal Units |
Special Feature | Heavy Duty |
Product Dimensions | 14"D x 18.1"W x 9"H |
Color | 12V |
Voltage | 12 Volts (DC) |
Refrigerant | R-134A |
Power Source | Battery Powered |
Control Method | App |
About this item
- Description: This electric air conditioner (indoor unit + outdoor unit) can be installed anywhere. It is operated by a battery (generator). Even if the engine is turned off, you can still use the air conditioner. Low noise, energy saving and environmental protection is your best choice. It will help you save thousands of dollars in gas bills every year.
- Electric compressor data: Voltage: DC 12V. Starting current: 75A. Rated speed: 2000rpm. Speed range: 1800rpm. Rated power: 550W.Cooling capacity: 1.688KW / 8875BTU. Condensing temperature range: 35°C-45°C: Evaporating temperature range: 15°C. Displacement: 25cc. Oil: POE-68/100ml.
- Evaporator parameters: Voltage: 12V, Refrigeration capacity: 32220BTU, 8116KCAL, 610CFM, Evaporator: 36-tube type 36PASS 4 WAY ALU, air volume: 4-speed 4SPEED, electronic thermostatic control, weight: 9KG, dimensions (L x W x H ): 80.5cm x 34cm x 14.5cm
- DC brushless controller: 1. Over/under voltage protection: DC 12V-(21V/10.5V). 2. Maximum power: 600W. 3. Working temperature: below 50℃.
- This electric air conditioner does not affect the horsepower of the car itself. Suitable for: trucks, tractors, excavators, construction vehicles, heavy vehicles, agricultural vehicles, RVs, pickups, etc.
Buy it with
Compare with similar items
This Item NEKPOKKA Universal Car Electric Air Conditioner Compressor 12V for Heavy Duty Truck Bus Van RV Motorhome Parking Lot Air Conditioner ... (12V) | Recommendations | dummy | dummy | dummy | dummy | |
Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | Try again! Added to Cart | |
Price | $880.00$880.00 | $745.00$745.00 | $680.00$680.00 | $755.00$755.00 | -8% $1,150.00$1,150.00 List: $1,250.00 | $585.00$585.00 |
Delivery | Get it Apr 5 - 18 | — | Get it Mar 28 - 29 | Get it as soon as Wednesday, Mar 27 | Get it as soon as Wednesday, Mar 27 | Get it Apr 5 - 18 |
Customer Ratings | ||||||
Sold By | AC Cooling | GYKJBEST | AC Cooling | AC Cooling | AC Cooling | AC Cooling |
cooling power | 8875 btus | 8875 btus | 9000 btus | 8875 btus | 6500 btus | 8875 btus |
control method | application | remote | remote | remote | application | — |
power source | Battery Powered | Battery Powered | Battery Powered | Battery Powered | Battery Powered | Battery Powered |
energy star | — | — | 0 | — | 0 | 5 Star |
model name | — | RV65F | bbsb | NEKPOKKA 12V | Car roof air conditioner 3 | Car electric air conditioner |
voltage | 12 volts of direct current | 12 volts of direct current | 12 volts of direct current | 12 volts of direct current | 12 volts of direct current | 12 volts of direct current |
wattage | 550 watts | 750 watts | 800 watts | 750 watts | — | 550 watts |
weight | — | 20 kilograms | 60 pounds | — | — | 55 pounds |
noise level | — | — | 35 decibels | 32 decibels | 40 decibels | 30 decibels |
What other items do customers buy after viewing this item?
- NEKPOKKA 12V DC air conditioner kit, car AC hot and cold dual use, suitable for RV, truck, farm car, van, excavator, bus, car, pickup, etc. Parking air conditioner/PTC heating (12V cold/hot)FREE Shipping by AmazonGet it as soon as Wednesday, Mar 27Only 3 left in stock - order soon.
- Treeligo 12V /24V Heating and Cooling dc Air Conditioner Car Automotive Under Dash Electric Power A/C system kit 24 volt for Truck, Camper, Van, RV, sleeper Cab Parking Lot (12, Volts (DC))FREE ShippingGet it Apr 1 - 2Only 11 left in stock - order soon.
Product information
Technical Details
Additional Information
ASIN | B09GP9RNYZ |
---|---|
Customer Reviews |
4.4 out of 5 stars |
Best Sellers Rank | #740,256 in Automotive (See Top 100 in Automotive) #284 in RV Air Conditioners |
Date First Available | September 23, 2021 |
Warranty & Support
Feedback
Product Description
This car electric air conditioning kit can be installed anywhere. It is operated by a battery (generator). You can still use the air conditioner even if the engine is off. Low noise, energy conservation are your best choice. It will help you save thousands of dollars in fuel costs every year.
Line Installation Drawing
If a fault occurs, the fault can be identified by the number of flashes of the light.
12V parameter
Semi-closed Horizontal Scroll Compressor
- Material: Aluminum alloy
- Voltage: 12V
- Starting current: 75A
- Refrigerating capacity: 1.688KW/8875BTU
- Rated speed: 1800 rpm
- Speed range: 1000-2300rpm
- Rated power: 550W
- Refrigeration oil: POE/130ml - 150ml (the oil is already in the compressor)
- Refrigerant type: R134a (600g)
- Displacement: 21cm³/r
evaporator
- Voltage: 12V
- Air type: Single cooling
- Evaporator coil: 36 pass 4way aluminum and copper coil
- Refrigerating capacity: about 32220 BTU
- Blower motor power: 80W
- Blower motor speed: 3800rpm
- 3-position blower switch and thermostat switch
- Motor material: copper
matters needing attention
- Please do not run the compressor without adding R134a gas (Freon) and connected to other parts. Otherwise, the compressor will be damaged.
- Please tighten the control board. Otherwise the board will be burnt.
Basic Requirements
- Please check whether the battery is 12V and the current should reach 75A before purchasing
- Vacuum is required before adding refrigerant. (15-20 minutes)
- Pressure value of adding refrigerant: 35psi for low pressure port, 140-180psi for high pressure port
Core Components
|
|
|
|
---|---|---|---|
Electric CompressorThe compressor can only be installed upright (foot down). The included angle between compressor spindle and horizontal line is not more than 5 ° |
evaporatorLarge evaporator, cooling capacity is about 32220 BTU.Mount horizontally or with the air outlet slightly tilted upwards. Favors evaporator drainage. |
condenserThe condenser is made of aluminum. # 6 and #8 outer threaded O-ring joints. This high-quality, all-aluminum universal radiator can be used for many custom applications. |
cooling fanThe fan uses 120W high power copper motor. The housing is made of iron and is strong and durable. Low noise and long life stable operation, easy to place. |
Installation steps
Explanation of text steps
- Step 1: Remove the cover of the compressor, insert the compressor connecting line into the cover until the black square rubber is completely embedded in the cover, and then cover the corresponding hole of the compressor.
- Step 2: Plug the evaporator connecting wire of the control panel into the evaporator extension wire. The color of the wire at the other end of the evaporator extension wire is connected to the evaporator. The green wire is connected to the green wire, the red wire is connected to the red wire, and the black wire is connected to the screw on the back of the evaporator. The yellow wire does not need to be connected.
- Step 3: Wrap the compressor overheat sensing wire of the control panel around the compressor.
- Step 4: Connect the drying bottle connecting line of the control panel to the pressure valve of the drying bottle.
- Step 5: Connect both sides of the drying bottle with the BH8 high-pressure hose. Connect the end with the IN mark on the drying bottle to the elbow joint of the condenser and the other end to the expansion valve of the evaporator.
- Step 6: Plug the fan connecting cable of the control panel into the fan extension cable, and plug the fan extension cable into the fan.
- Step 7: The power cord of the control panel is relatively short when leaving the factory. If the distance is not long enough, you can directly replace it with an extended power cord. (The kit is provided with an extended power cord)
- Step 8: Connect the high and low pressure interfaces of the compressor. Blue L port, use the aluminum connector of L, and then connect to the evaporator interface with BH13 low pressure hose. Red H port, use the aluminum connector of H, and then use the hose of BH10.5 to connect to the other interface of the condenser.
- After all the above steps are completed, vacuum, add refrigerant R134a/600g, and then connect the power supply. Do not open the air conditioner without adding refrigerant, or the compressor will be damaged. If there is a fault, please do not worry. It indicates which step of the installation step has a problem. There is a flashing light on the panel. You can confirm the fault according to the panel fault picture above. Such as insufficient voltage, insufficient refrigerant, excessive refrigerant and high pressure.
- If you do not understand anything, you can consult us at any time.
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on Amazon-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
I needed longer hoses and Orings , found them very cheap at ACME.
I mounted this product in a 2016 Freightliner Cascadia and it makes really cool air without starting the engine.
They shipped the unit way quicker than stated.
The seller was very responsive and helpful.
Recommend this product 100% . Do not hesitate to contact seller if you have any issue.
PS: you will found relays inside the box but as they are going to explain to you, there is no need for relay in the wiring diagram because of the new controler type.
As of for the inside unit, red goes to red from command box, green goes to green from command box, black goes to evaporator ground, yellow no need to be mounted anywhere (that's for troubleshooting or something like that)
PS...from 100 F up it doesn't cool anymore. Needs a bigger evaporator to cool down the freon, but it does the job up to 100F.